On the Ground Performance OTGP logo
On the Ground Performance OTGP products On the Ground Performance OTGP gallery On the Ground Performance OTGP tech On the Ground Performance OTGP shop tour On the Ground Performance OTGP contact
OTGP For Lightning F-150 Rack Kit
OTGP POWER RACK AND PINION KIT


1997-2003 Ford F-150 2WD Pickups
1999-2004 Ford F-150 Lightning Pickups

Download a pdf of Power Rack & Pinion Kit installation instructions.
Download a pdf of Upper Control Arm installation instructions.
Download a pdf of Lower Control Arm installation instructions.

OTGP Power Rack & Pinion Kit comes complete with a tubular fabricated mounting crossmember that self locates in the chassis. A 15:1 power rack, all lines, fittings, stainless steel universal joints, steering shaft, and idler bearing, as well as a fabricated steering idler bracket and all hardware necessary for a coplete bolt-in assembly. This kit comes with tubular upper and lower control arms along with a power rack and pinion kit.

OTGP Ford Lightning F-150 upper control arms

OTGP Upper Control Arms use MOOG replacement ball joints fitting the factory spindle with no modifications. We have re-designed the upper control arm to cater to the performance market that demands a quality part to match the strains of speed and handling,. The ball joint is relocated to the rear of the vehicle for an additional three plus degrees of positive caster, as well as being shifted outboard to compensate for lower vehicles to achieve 0° of camber if necessary. The ball joint angle has been changed to correct angularity problems associated from lowered vehicles with stock upper control arms. The ball joint is now correctly aligned with the spindle.

OTGP Ford F-150 Lightning Lower Control Arms Chromoly DOM Powder Coated


OTGP Lower Control Arms use MOOG replacement ball joints fitting the factory spindle with no modifications. We have re-designed the lower control arm to cater to the performance market that demands a quality part to match the strains of speed and handling. The ball joint angle has been changed to correct angularity problems associated from lowered vehicles with stock type control arms. The ball joint is now correctly aligned with the spindle. These tubular lower control arms are half the weight of the stock stamped steel control arms.


SHIPPING AND ORDERING
Please call Woodbine Motorsports at (443) 340-4375 for pricing and to order, or visit them online at woodbinemotorsports.com.

Chassis Products
   Roll bars
   Roll cage
   Wishbone Kit
   Engine Limiter Kit
   Panhard Bar Kit
   Safety Loop Kit
   Rear Crossmember
   Custom Bent Frame Rails
   Swingout Side Bar Kit
1997-2003 Ford F-150/Lightning
Mustang II Control Arms

Chromoly Tubing
chromium-molybdenum
4130 Chromoly Tubing
Chrome Moly Tubing
4130 Chrome Moly Tubing
Chrome Moly
Chromoly
Box Tubing
Chrome Moly
DOM Tubing
Drawn over mandrel tubing
mild steel tubing
sheet metal
Ford Lightning Control arms
Ford F-150 control arms
chrom-moly
chrom-moly tubing
4130 Tubing
4130 plate
Chromoly plate
Chrome moly plate
roll bar
rollbar
rollcage
roll cage
chassis
chassis fabrication
tube bending
4-link suspension



 
On the Ground Performance OTGP
Links Company Policy © 2008 Dani Bradford